vroom vroom~

after months of hard earn,savings and countless times of surveys.. finally i made my decision to mod my exhaust system at 1 of the well know exhaust specialist in malacca probably in malaysia.. after discussin wit the boss there.. i have finalised my exhaust setup as 4-2-1 tuned length mandrel bent extractor, 1.6 inch piping from extractor to swirling bullet, then after tat a 1.7 inch piping to a straight muffler (not cylindrical type but box type as i'm tryin to be a silent killer)

after we settled on the setup.. the workers start the work right away and had my car lifted up to get rid of the old exhaust..

after 14 years of service.. this is how my trusty old exhaust look like.. see all the rust on the steel

one of the workers is adjusting the back pipe of the exhaust

my 14 years old extractor.. its time for it to retired.. hahaha

the inner view of the swirling bullet.. it can make whirlwind in there..

something missing there??

after half an hour of assembly and welding.. this is how my exhaust setup look like..

closer look at my straight flow muffler.. quite big huh

the new piping is using back the original route.. big no no to straight piping.. notice there are black spot on the piping.. in fact its black paint to prevent rusting

after finished everything the worker start the engine and let the extractor heat up.. you can clearly see the smoke..

before i bid farewell to the shop, i found a sad place which is the graveyard of exhaust.. hahaha.

the whole setup cost me rm550.. later at night i took a spin my ride and i found that the power gain is significant.. haha so what will be my next mod? erm.. i'm still thinkin'